16. Jan 2019 05:46 UTC |

EN

DE

By submitting my data, I agree to be saved by Aeromarkt and used for the purpose of contacting me regarding my request, self-promotion, dates and information. Personal data, private addresses and email addresses will be treated confidentially and will not be passed on to third parties.

STC for MT propellers for Cessna 208 Blackhawk

QFJ 5-blade MTV-27 or 4-blade MTV-16 now STC’d by FAA

Atting, October 2017. MT-Propeller Entwicklung GmbH has received the FAA STC SA03959NY for the installation of the next generation 5-blade Quiet Fan Jet scimitar composite propeller MTV-27-1-E-C-F-R(P)/CFR245-55a or the 4-blade scimitar composite propeller MTV-16-1-E-C-F-R(P)/CFR250-55a on the Cessna 208, 208B Blackhawk XP42. These installations are already certified by EASA STC 10058942.



MT-Propeller Vice President Martin Albrecht announces, that the 5-blade QFJ MTV-27 Propeller on the C208 Blackhawk feature the following advantages:

- Equal or better performance
- 200 ft shorter take-off distance
- 3 kts cruise speed increase
- more ground clearance for less blade tip erosion
- With optional rpm reduction to 1950 rpm: All models comply with the strict German noise regulations 2010– „Landeplatz-Lärmschutz-Verordnung“ for unrestricted airport operation in Germany and other European Countries

The installation of the 4-blade MTV-16 on the C208 Blackhawk provides the following advantages:

- Cruise Speed increase by 3 kts.
- Approximately 35 lbs less weight than the original propeller
- Equal or better performance

The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation,and are repairable in case of an FOD.

They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.

About MT-Propeller

MT-Propeller is the world leading natural composite propeller manufacturer with 30 propeller models from 2-blade to 6-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers. Over 30 years ago, the first MT-Propeller was shipped.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels or hovercraft. Fulfilling the highest certifications requirements they are also supplemental type certified on Part 25 aircraft. There is no current Airworthiness Directives (AD).

MT-Propeller is holder of over 200 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 20,000 propeller systems with more than 68,000 blades are in service. 130 Million fleet hours where already performed on MT-Propellers.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.
Aircraft Dealer Listings

News

Generation 2 Vision Jet unveiled
Duluth, Minn. & Knoxville, Tenn. (8 January 2019) – Cirrus Aircraft today announced the launch of the next generation of the Vision JetTM - ‘G2’ - enhancing performance, comfort and

more »
Interesting webinars in first quarter of 2019
January 8, 2019 - Garmin is pleased to announce aviation webinars through the first-half of 2019. Ranging from Garmin Pilot tips and tricks, cost-effective autopilot upgrades to low-cost

more »
Garmin® announces certification of G500H TXi for helicopters
OLATHE, Kan. /January 3, 2019/Business Wire — Garmin International, Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced the certification and availability of the G500H TXi touchscreen

more »
MTV-34 certified for engines up to 141 shp
Atting, December 2018. MT-Propeller received the extended Type Certification for the Propeller Model MTV-34 for engines up to 141 shp at a maximum propeller speed of 2560 rpm.





more »
60 aircraft sold to Middle East flight school
At Dubai Air Show 2017 the Saudi National Company of Aviation (SNCA) and CAE announced a collaboration agreement for the creation of a CAE Authorized Training Centre in the region.

more »
2018 most successful flying season
Friedrichshafen, 29.11.2018 – Deutsche Zeppelin-Reederei, the company operating the modern Zeppelin NT airships is looking back upon its most successful flying season ever with more

more »
Brexit! So, what are we doing about it?
As we approach an important period in the Brexit negotiations it seems like a good time to explain where we at Adams Aviation are, and what we have been doing to ensure that we are

more »
Official Office Opening of European Office at Amersfoort, NL
Trig Avionics has officially opened its new European Office, in Amersfoort in the Netherlands. Trig manufactures certified communication, navigation and surveillance equipment for general

more »
f.u.n.k.e. Avionics
Ulm, October 2018: For the German avionics manufacturer f.u.n.k.e. , a variety of engineering projects, both for their

more »
Another Embraer Phenom 100E for the DACH region (Germany, Austria, Switzerland)
Atlas Air Service sells a Phenom 100E to a customer from the region around Lake Constance. The aircraft will be operated by Jet24 GmbH in Vienna. In terms of comfort and operating costs,

more »
more news »
App
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)