3-blade MTV-12 now certified for Piper’s PA-34-200 Seneca

Next FAA STC for MT-Propeller

Atting, July 2022- MT-Propeller Entwicklung GmbH has received the FAA STC SA00037IB for the 3-blade MTV-12-B-C-F/CF(L)183-59( ) on the PA-34-200 (Seneca I) powered by Lycoming IO-360-C1E6, LIO-360-C1E6. This installation is already certified by EASA STC 10076572.



MT Propeller’s 3-blade MTV-12 prop is now certified for being retrofitted to Piper’s PA-34-200 Seneca aircraft.

MT-Propeller Vice President Martin Albrecht says, that the installation features the following advantages:

- Best vibration damping characteristics for almost vibration free propeller operations

- Bonded on stainless steel leading edge for best erosion protection of the blades

- Take-off distance slightly improved

- Up to 20 lbs less weight than the original propeller

- Unlimited blade life

- Increased ground clearance for less blade tip erosion

- No rpm vibration restriction

About MT-Propeller



MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 26 000 propeller systems with more than 87 000 blades are in service.

180 Million fleet hours where already performed on MT-Propellers.

With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
Aircraft Dealer Listings

News

Production ramp-up, new F2 and CT aircraft shipped
September 15th 2023, Eisenach Germany - Flight Design general aviation, the European manufacturer of the F2 and CT series of aircraft reports that the first 2 production F2-LSA models
TMZ mandatory zone in the Netherlands
A TMZ with mandatory listening watch below the Schiphol TMA-1 in the Netherlands is in force since July 13. Many foreign pilots use Dutch airspace, an information pamphlet has been
Successful seventh edition
Bern, 10th September 2023 - This year's Electrifly-In Switzerland, held this weekend at the Swiss Air Force base at Bern Airport, was a success. The event was dedicated to sustainable
Your key to interconnectivity in aviation
This editorial is currently available only in German language.

You may find it here
EASA STC for Piper PA-28R(T)-201T Turbo Arrow III, IV
Atting, August 2023 - MT-Propeller Entwicklung GmbH has received the EASA STC 10082080 for the installation of the 3-blade natural composite propeller MTV-12-D/188-53( ) on the Piper
New STCs for Slingsby Firefly and Airtractor
Atting, January 2023 – German prop manufacturer MT-Propeller Entwicklung GmbH received new authorizations to install their state-of-tge-art propellers to two further aircraft models.
AAS now accredited member of IADA
Atlas Air Service AG is now an accredited member of the International Aircraft Dealers Association (IADA). Members of the IADA are the world's most renowned dealers of business aircraft.
Founded in 1968 - and still going strong in 2023
From humble beginnings, shaped from an idea in the basement of a London pub in 1968, Adams Aviation has reached its milestone 55th birthday. The company has seen plenty of change in
100,000 MT-Propeller blade manufactured
MT-Propeller natural composite blades have been a success since they were first built. Because of their natural composite construction, they are much lighter than aluminum propeller
Piper Meridian converted to a PT6A-135A
Having ideas how to make aircraft quieter and more efficient, MT-Propeller took the Piper M500 Meridian as a new program, replacing the original PT6A-42A engine with a PT6A-135A engine.
more news »
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)