Two-blade MT-Propeller on Maule MX-7 Series

Atting, September 2026 - MT-Propeller Entwicklung GmbH received the FAA STC SA12472IB for the installation of 2-blade MTV-15-B/203-58 on the MX-7-180, MX-7-180B, MX-7-180C, MXT-7-180, MX-7-180A, MXT-7-180A powered by a Lycoming O-360-C1F engine.

This installation is already supplemental type certified by EASA STC 10028096.



MT-Propeller Entwicklung GmbH have received the FAA STC their two-blade propeller on the Maule MX-7 series.

MT-Propeller Vice President Martin Albrecht says that the installation features the following advantages:

Best vibration damping characteristics for almost vibration free propeller operations

Up to 10 kg (22 lbs) less weight than the original propellers

Unbeatable esthetic ramp appeal

Nickel Leading Edges

The long-time proven MT-Propeller natural composite blades have no life limitation and are repairable in case of a FOD.

About MT-Propeller



MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements, they are also supplemental type certified on Part 25 aircraft.

No active AD, this is a safety record no other manufacturer has achieved so far.

The MT-Propeller fleet is approaching a total of 145 000+ propeller blades on 36 500+ propeller systems in operation and can look back on accumulated 200 million flight hours in over 45 years.

With the best damage tolerance and repairability, MT-Propeller has the lowest operational cost of any certified composite propeller manufacturer. MT-Propeller is holding more than 230 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 55% of the US Aircraft Industry.

With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop, MT-Propeller has proven reliability for years.

A factory certified network of 62 service centers provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com