Now also certified for Cirrus’ SR20
MT-Propeller’s 3-blade scimitar prop
Atting, May 2026 - MT-Propeller Entwicklung GmbH received the EASA STC 10088128, FAA STC SA12227IB and TCCA Canada SA26-39 for the installation of the scimitar 3-blade MTV-9-B/188-50() propeller on the Cirrus Model SR20 powered by a Lycoming IO-390-C3B6 engine.
.
This installation is also supplemental type certified in Brazil, Argentina, Mexico, Colombia, New Zealand.
MT-Propeller’s 3-blade scimitar prop has now received a supplemental type certificate for its installation in the Cirrus SR20.
MT-Propeller Vice President Martin Albrecht says that the installation features the following advantages:
Best vibration damping characteristics for almost vibration free propeller operations
Bonded on nickel alloy leading edge for best erosion protection of the blades
Enhanced climb by approx. 3 % (MTOW, ISA)
Approx. 18 lbs less weight than the original propellers
Unlimited blade life
FOD repairable blades
Significant inside and outside noise reductions
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements, they are also supplemental type certified on Part 25 aircraft.
No active AD, this is a safety record no other manufacturer has achieved so far.
The MT-Propeller fleet is approaching a total of 125 000+ propeller blades on 34 500+ propeller systems in operation and can look back on accumulated 200 million flight hours in over 45 years.
With the best damage tolerance and repairability, MT-Propeller has the lowest operational cost of any certified composite propeller manufacturer.
MT-Propeller is holder of more than 230 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 55% of the US Aircraft Industry.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven reliability for years.
A factory certified network of 62 service centers provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
This installation is also supplemental type certified in Brazil, Argentina, Mexico, Colombia, New Zealand.
MT-Propeller’s 3-blade scimitar prop has now received a supplemental type certificate for its installation in the Cirrus SR20.
MT-Propeller Vice President Martin Albrecht says that the installation features the following advantages:
Best vibration damping characteristics for almost vibration free propeller operations
Bonded on nickel alloy leading edge for best erosion protection of the blades
Enhanced climb by approx. 3 % (MTOW, ISA)
Approx. 18 lbs less weight than the original propellers
Unlimited blade life
FOD repairable blades
Significant inside and outside noise reductions
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements, they are also supplemental type certified on Part 25 aircraft.
No active AD, this is a safety record no other manufacturer has achieved so far.
The MT-Propeller fleet is approaching a total of 125 000+ propeller blades on 34 500+ propeller systems in operation and can look back on accumulated 200 million flight hours in over 45 years.
With the best damage tolerance and repairability, MT-Propeller has the lowest operational cost of any certified composite propeller manufacturer.
MT-Propeller is holder of more than 230 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 55% of the US Aircraft Industry.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven reliability for years.
A factory certified network of 62 service centers provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
More news from this category
Piper Pa-28-235 Pathfinder
Atting, June 2026 - MT-Propeller Entwicklung GmbH received the FAA STC SA04463NY for the installation of the 3-blade propeller MTV-9-B/198-52 on the Piper PA-28-235 Cherokee Pathfinder powered by the engines Lycoming O-540-B1B5 or Lycoming O-540-B4B5.
read nowMT-Propeller’s 4-blade prop
Atting, May 2026 - MT-Propeller Entwicklung GmbH received the EASA STC 10089430 for the installation of the scimitar 4-blade MTV-14-D/195-30( ) propeller on the Cirrus Model SR22T powered by a Lycoming TSIO-550-K engine. As an option fluid De-Ice Boots can be installed.
read nowmore News