Dornier DO 27 Series with 2-blade MT-Propeller

LBA STC granted

Atting, February 2018 - MT-Propeller Entwicklung GmbH has received the LBA STC SA 1477 for the installation of the 2-blade constant speed propeller MTV-15-AA-C/ C249-42 on the Dornier DO 27 A-1, A-3, A-4, B-1, B-2, B-3, Q-1, Q-4, Q-5, Q-6 powered by the engine Lycoming, BMW, Piaggio GO-480-B1A6.



MT-Propeller has received the LBA’s STC for the installation of a 2-blade constant speed propeller on the Dornier DO 27.

MT-Propeller President Gerd Muehlbauer says, that the installation feature the following advantages:

- Best vibration damping characteristics for almost vibration free propeller operations!
- Enhanced climb performance up to approx. 5% (SL, ISA conditions)!
- Original Propeller Look!
- Unlimited blade life!
- FOD repairable blades!
- No restricted rpm range!
- Some Models comply with the strict German Noise Regulations “Landeplatz Lärmschutz Verordnung” for unrestricted operation in Germany and other European Countries!

This new propeller is a cost-effective alternative to all existing propellers getting more expensive every year to be operated. By this customers can operate the aircraft with a reasonable cost. No ADs ect with this new composite prop.

About MT-Propeller

MT-Propeller is the world’s leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels or hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 20,000 propeller systems with more than 69,000 blades are in service.

130 Million fleet hours where already performed on MT-Propellers. 36 years ago, the first MT-Propeller was shipped.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

Aircraft Dealer Listings

News

Eisenschmidt once again present at this year’s show
14.03.2024 – From April 17 through 20, 2024 Friedrichshafen on Lake Constance will once again be the meeting point for Europe’s General Aviation community. The well known German pilot
Further major orders for AutoGyro
Hildesheim, March 14, 2024 – At the start of this year AutoGyro GmbH won two major contracts for professional gyroplanes. A total of 18 „Sentinels“, most camera-equipped, were ordered
PC-12 Silent 7 Propeller
The popular 7-bladed MTV-47 MT-Propeller "The Silent 7" is now approved for even shorter take-off distances to further increase the operational capability of the PC-12 through EASA
Eisenschmidt starts Declared Training Organisation
24.01.2024 – Eisenschmidt is well on its way to start a certified DTO (Declared Training Organisation).

The well known German pilot supply company have now released a first

AAS brokers Cessna Citation CJ1+
Bremen, 31st January 2024 - Atlas Air Service hands over a Cessna Citation CJ1+ to a client from northern Germany.

As part of a brokerage agreement, Atlas Air Service AG has

Uncertain future of Avgas 100LL
Further to our previous report on the impending discontinuation of the use of Avgas 100LL (see below), AOPA Germany reports that Shell have now submitted an application for the temporary
3-blade MT-Prop MTV-9 for Cessna’s 182
Atting, January 2024 - MT-Propeller Entwicklung GmbH received the EASA STC 10083426 for the installation of the 3-blade Propeller MTV-9-D/200-58 on the Cessna Cessna 182H, J, K, L,
Flying to AERO in your own plane
December 21, 2023 | Friedrichshafen – Visitors of AERO 2024 will also be able to attend the leading global trade fair for General Aviation in their own aircraft. A new, fair procedure
DULV and AOPA address problem together
With kind permission by AOPA Germany we publish here an excerpt from AOPA Germany’s newsletter no. 357 dated December 8th. 2023. It addresses alleged problems with Rotax engines which,
Continental® Certified Factory New and Rebuilt Piston Engines
As well as offering parts support, Adams Aviation has been successfully supplying the full range of factory new and rebuilt Continental® engines for many years.

With their

more news »
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)