5-blade prop for Kodiak 100 series
MT obtains EASA STC
Atting, May 2019: MT-Propeller Entwicklung GmbH has received the EASA STC 10069627 for the Quiet Fan Jet composite propeller MTV-27-1-E-C-F-R(P)/CFR240-55( ) on the Quest Aircraft Design LLC Kodiak 100 series. The FAA STC is in progress.
MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:
- Take-Off improvement by 20%
- No propeller speed restrictions on ground while operating in low idle
- Lower ITTs during start-up for less engine wear
- Significant cabin noise of up to 5 dB(A) and vibration reduction
- Unbeatable esthetic ramp appeal
- Comply with the strict German noise regulations 2010 for unrestricted airport operations in Germany and other European Countries!
- Max. RPM reduction to 2000 RPM with increased torque for 750 shp!
MT-Propeller has received the EASA STC for its Quiet Fan Jet composite propeller on the Quest Aircraft Kodiak 100 series.
Due to the smaller diameter the MT-Propeller for the Kodiak 100 series has more ground clearance for less blade tip erosion and FODs.
The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 22 000 propeller systems with more than 74 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 37 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:
- Take-Off improvement by 20%
- No propeller speed restrictions on ground while operating in low idle
- Lower ITTs during start-up for less engine wear
- Significant cabin noise of up to 5 dB(A) and vibration reduction
- Unbeatable esthetic ramp appeal
- Comply with the strict German noise regulations 2010 for unrestricted airport operations in Germany and other European Countries!
- Max. RPM reduction to 2000 RPM with increased torque for 750 shp!
MT-Propeller has received the EASA STC for its Quiet Fan Jet composite propeller on the Quest Aircraft Kodiak 100 series.
Due to the smaller diameter the MT-Propeller for the Kodiak 100 series has more ground clearance for less blade tip erosion and FODs.
The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 22 000 propeller systems with more than 74 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 37 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
