03. Mar 2021 06:18 UTC |

EN

DE

By submitting my data, I agree to be saved by Aeromarkt and used for the purpose of contacting me regarding my request, self-promotion, dates and information. Personal data, private addresses and email addresses will be treated confidentially and will not be passed on to third parties.

EASA STC for Beech 1900 series with 5-blade MT prop

MT Propeller

Atting, June 2019 - MT-Propeller Entwicklung GmbH has received the EASA STC 10070090 for the Quiet Fan Jet composite propeller MTV-27-1-()-C-F-R(P)/CFR260-65k on the Beech Model no. 1900, 1900C and 1900D powered by two Pratt & Whitney PT6A-65B or -67D Propeller Turbines. The FAA STC has now also been obtained.



MT-Propeller has received the EASA STC for a five blade Quiet Fan Jet composite propeller on the Beech 1900 series of aircraft.

MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages compared to the original 4-blade propellers:

- The 5-blade MT-Propeller has a smaller diameter of about 8 inch compared to the original 4-blade propeller, this means more ground clearance of about 4 inch for less FOD and also more clearance to the fuselage, therefore less cabin noise from the prop tips

- Take-Off of the Beech 1900 is improved by 4%, so compared to the original AFM a higher safety for the calculated take-off run

- The MTV-27 has no propeller ADs

- The 5-blade MT-Propeller reduces the propeller noise by up to 5 dB(A)

- The MTV-27 has bonded on wide chord nickel alloy leading edges for superior erosion protection of the blades

- TBO for the MT-Propeller is 4000 hours or 6 years, whatever comes first, for low maintenance costs

- No intermediate inspections are needed between the TBO which requires the propeller removal

- Reduced costs for spare parts, like blades and lower overhaul costs, for the complete propeller assembly

- No rpm restriction for the complete operational range

- The long time proven MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD. They also provide best vibration damping characteristics for almost vibration free propeller operation.

About MT-Propeller

MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 22 000 propeller systems with more than 74 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 37 years ago, the first MT-Propeller was shipped.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
Aircraft Dealer Listings

News

Quest Kodiak floatplane with 5-blade MT-Prop
Atting, February 2021- MT-Propeller Entwicklung GmbH has received the EASA STC Nr. 10069627 REV. 1 for the 5-blade Quiet Fan Jet composite propeller MTV-27-1-E-C-F-R(P)/CFR240-55(
Three-blade prop for Piper 28 and
MT-Propeller Entwicklung GmbH has received the FAA STC SA04463NY for the next generation composite 3-blade propeller MTV-9-B/198-52 on the Piper PA-28-236 Dakota with the engine IO-540-J3A5D.
PC-24 now offered with 10-Seat Commuter Interior
A first PC-24 with high-utility 10-seat commuter configuration has been delivered to a customer in the western United States, allowing the Super Versatile Jet to prove yet again how
EASA STC for Beech 1900 series with 5-blade MT prop
Atting, June 2019 - MT-Propeller Entwicklung GmbH has received the EASA STC 10070090 for the Quiet Fan Jet composite propeller MTV-27-1-()-C-F-R(P)/CFR260-65k on the Beech Model no.
Shape of things to come
OLATHE, Kan./Feb. 10, 2020/Business Wire – Garmin® International, Inc., a unit of Garmin Ltd. (NASDAQ:GRMN), today announced a long-term agreement to provide the state-of-the-art Garmin
GI 275 can modernize thousands of aging cockpits
OLATHE, Kan./Jan.26, 2021/ Business Wire – Garmin® International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), is pleased to announce that the popular GI 275 electronic flight instrument
AERO 2021 to be held in the summer
21/01/2021 | Friedrichshafen, Germany - Due to the COVID-19 pandemic, the Global Show for General Aviation will be unable to start as planned on April 21, 2021 on the exhibition grounds
Covid vaccine distribution
In addition to the refrigeration problem, distributing COVID vaccines can be costly and nearly impossible in remote areas – a logistics challenge that could lead to a disproportionate
Garmin announces new GFC 500 Autopilot certifications
OLATHE, Kan./Dec. 17, 2020/ – Garmin® International Inc., a unit of Garmin Ltd., today announced it has received Federal Aviation Administration (FAA) Supplemental Type Certification
Garmin with new feature for GTN Xi series of navigators
Garmin Ltd., today announced new features now available for the GTNTM Xi Series of navigators including a Glide Range Ring that helps safety-minded pilots visualize the estimated area
more news »
App
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)