MT Propeller: 3-blade props
for Piper PA-28R(T) series
Atting, December 2019. German Prop manufacturer MT-Propeller Entwicklung GmbH have received the EASA STC 10071833 for the 3-blade natural composite propeller MTV-12-B/188-59( ) on the Piper PA-28R(T) series, powered by the engine series IO-360-B, IO-360-C or IO-360-C. The FAA STC is in progress.
MT-Propeller have received the EASA STC for the installation of their new 3-blade natural composite propeller MTV-12-B/188-59( ) on aircraft of the Piper PA-28R(T) series.
MT-Propeller President Gerd Muehlbauer says, that the installation features the following advantages:
- Shorter take-off distance by approx. -5 % (SL, ISA conditions)
- Enhanced climb and cruise performance by approx. 5 to 10% (SL, ISA conditions)
- Enhanced cruise performance up to 4 kts (MTOW, ISA conditions)
- Up to 10 kg lighter than the original propeller
- With “max. Engine Speed 2400 rpm” the airplane complies with “Erhöhter Schallschutz” for Germany
- Unbeatable esthetic ramp appeal
- Cooler CHTs by up to 35°C (95°F)
The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD. They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on stainless steel erosiion protection sheats for best erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 22 000 propeller systems with more than 74 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 37 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
MT-Propeller have received the EASA STC for the installation of their new 3-blade natural composite propeller MTV-12-B/188-59( ) on aircraft of the Piper PA-28R(T) series.
MT-Propeller President Gerd Muehlbauer says, that the installation features the following advantages:
- Shorter take-off distance by approx. -5 % (SL, ISA conditions)
- Enhanced climb and cruise performance by approx. 5 to 10% (SL, ISA conditions)
- Enhanced cruise performance up to 4 kts (MTOW, ISA conditions)
- Up to 10 kg lighter than the original propeller
- With “max. Engine Speed 2400 rpm” the airplane complies with “Erhöhter Schallschutz” for Germany
- Unbeatable esthetic ramp appeal
- Cooler CHTs by up to 35°C (95°F)
The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD. They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on stainless steel erosiion protection sheats for best erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 22 000 propeller systems with more than 74 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 37 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com