5-blade prop for Airtractor Series
MT obtains EASA STC
Atting, March 2020 - MT-Propeller Entwicklung GmbH has received the EASA STC 10072601 for the installation of the Quiet Fan Jet composite propeller MTV-27-1-( )-C-F-R(P)-J/CFR300-82( ) on the Airtractor AT-600, -800 Series Models: AT-802, AT-802A powered by a Pratt & Whitney PT6A-65 or PT6A-67 Propellerturbine.
The FAA STC is in progress.
MT-Propeller have received the EASA STC for the installation of the Quiet Fan Jet composite propeller MTV-27 on the Airtractor AT-600, -800 Series Models powered by a Pratt & Whitney PT6A-65 or PT6A-67 turboprop.
MT-Propeller Vice President Martin Albrecht says, that the installation features the following advantages:
- Take-Off improvement by 5%, so compared to the original AFM a higher safety for the calculated take-off run
- No propeller ADs
- TBO 4000 hours or 6 years, whatever comes first, for low maintenance costs
- No intermediate inspections on a agriculture installation
- No intermediate inspections are needed between the TBO which requires the propeller removal
- Reduced cost for spare parts, like blades and lower overhaul costs, for the complete propeller assembly
- No rpm restriction for the complete operational range
- ROC improved by 8% (Aerial Surveillance Configuration)
The MT-Propeller natural composite blades have no life limitation and are repairable in case of an FOD.
They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 25 000 propeller systems with more than 80 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 38 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
MT-Propeller have received the EASA STC for the installation of the Quiet Fan Jet composite propeller MTV-27 on the Airtractor AT-600, -800 Series Models powered by a Pratt & Whitney PT6A-65 or PT6A-67 turboprop.
MT-Propeller Vice President Martin Albrecht says, that the installation features the following advantages:
- Take-Off improvement by 5%, so compared to the original AFM a higher safety for the calculated take-off run
- No propeller ADs
- TBO 4000 hours or 6 years, whatever comes first, for low maintenance costs
- No intermediate inspections on a agriculture installation
- No intermediate inspections are needed between the TBO which requires the propeller removal
- Reduced cost for spare parts, like blades and lower overhaul costs, for the complete propeller assembly
- No rpm restriction for the complete operational range
- ROC improved by 8% (Aerial Surveillance Configuration)
The MT-Propeller natural composite blades have no life limitation and are repairable in case of an FOD.
They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 25 000 propeller systems with more than 80 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 38 years ago, the first MT-Propeller was shipped.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
