27. Oct 2020 09:21 UTC |

EN

DE

By submitting my data, I agree to be saved by Aeromarkt and used for the purpose of contacting me regarding my request, self-promotion, dates and information. Personal data, private addresses and email addresses will be treated confidentially and will not be passed on to third parties.

FAA STC for Kodiak 100 with 5-blade MT-Prop

MT Propeller

Atting, July 2020 : MT-Propeller Entwicklung GmbH has received the FAA STC Nr. SA04450NY for the Quiet Fan Jet composite propeller MTV-27-1-E-C-F-R(P)/CFR240-55( ) on the Quest Aircraft Design LLC Kodiak 100 series powered by a Pratt & Whitney PT6A-34 propeller turbine.



MT-Propeller have received the FAA’s STC for the Quiet Fan Jet composite propeller MTV-27 on the Quest Aircraft Design LLC Kodiak 100 series powered by a Pratt & Whitney PT6A-34 propeller turbine.

This installation is already certified by EASA STC 10069627 and TCCA Canada Validation Nr. 510-O-20-0070.

MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:

- Take-Off improvement by 20%
- No propeller speed restrictions on ground while operating in low idle
- Lower ITTs during start-up for less engine wear
- Significant cabin noise - up to 5 dB(A) - and vibration reduction
- Unbeatable esthetic ramp appeal
- Comply with the strict German noise regulations 2010 - „Landeplatz Lärmschutz Verordnung“ for unrestricted airport operations in Germany and other European Countries!
- Max. RPM reduction to 2000 RPM with increased torque for 750 shp!

Due to the smaller diameter the MT-Propeller compared to the original metal propeller the Kodiak 100 series has more ground clearance for less blade tip erosion and FODs. The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of a FOD.

They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.

About MT-Propeller

MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 25 000 propeller systems with more than 80 000 blades are in service. 150 Million fleet hours where already performed on MT-Propellers. 38 years ago, the first MT-Propeller was shipped.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
Aircraft Dealer Listings

News

Diesel powered P2010 TDI
CAPUA, Italy – After the live-streaming world premiere held in May 2020, which introduced the P2010 TDI to the market, Costruzioni Aeronautiche TECNAM SpA® has announced today the achievement
AirShampoo landing fee vouchers for 2021
Once again, German GA provider AirShampoo are providing their landing fee vouchers for the coming flying season of 2021 – a popular and by now well established feature that makes flying
Bristell B23 now fully EASA certified
With ten sold light aircraft in Germany last year (2019), Czech manufacturer Bristell moved up into the ranks of this market segment’s top sellers in this country. Now, their successful
Three-blade prop for Piper 28 and world’s first seven-blade unducted prop for Pilatus PC-12
MT-Propeller Entwicklung GmbH has received the FAA STC SA04463NY for the next generation composite 3-blade propeller MTV-9-B/198-52 on the Piper PA-28-236 Dakota with the engine IO-540-J3A5D.
Impressive show of electric aviation
Quiet and low CO2, that's how flying works today. Around thousand of interested visitors to this year's Electrifly-In Switzerland, eTrophy & Symposium could see this for themselves.
DA50 RG receives EASA Certification
09 September 2020 : Diamond Aircraft proudly announces EASA (European Union Aviation Safety Agency) certification for its exciting new DA50 RG single engine piston with retractable
World Directory of Light Aviation 2020/2021
The new directory lists images, descriptions and technical data over 1000 aircraft: ultralights, microlights, LSA, gyrocopters, ul-helicopters, certified aircraft, kitplanes, trikes,
FAA STC for Kodiak 100 with 5-blade MT-Prop
Atting, July 2020 : MT-Propeller Entwicklung GmbH has received the FAA STC Nr. SA04450NY for the Quiet Fan Jet composite propeller MTV-27-1-E-C-F-R(P)/CFR240-55( ) on the Quest Aircraft
G500 TXI and G600 TXI flight display
OLATHE, Kan./July 15, 2020/Business Wire – Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced G500 TXi and G600 TXi flight display enhancements that bring
Garmin® expands G1000 NXi to include Phenom 300
OLATHE, Kan./July 7, 2020/Business Wire – Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced certification of the G1000® NXi integrated flight deck upgrade
more news »
App
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)