5-blade prop available from MT
Piper PA-46-500TP
Atting, May 2022 - MT-Propeller Entwicklung GmbH has received the ANAC Brazil STC 2022S04-05 for the Quiet Fan Jet 5-blade scimitar composite propeller MTV-27-1-E-C-F-R(P)/CFR203-58d on the PA-46-500TP powered by the propeller turbine P&WC PT6A-42A.
This installation is also EASA certified by STC # 10047226 and FAA certified by STC SA03446NY.
Piper PA 46-500 equipped with MT’s Quiet Fan Jet 5-blade scimitar composite propeller.
MT-Propeller President Gerd Mühlbauer says that the propeller installation provides
- General performance improvement (10% shorter take-off distance, 4% better climb Performance, 3 kts faster in cruise)
- Approx. 3 lbs less weight than the original metal propeller
- Cooler ITT on ground with condition lever at low and high idle position
- No propeller speed restrictions on ground while operating in low idle, possibility to reduce Ng to 57% for better ground handling
- More ground clearance => less FODs
- All models comply with the strict German noise regulations 2010–„Landeplatz Lärmschutz Verordnung“ for unrestricted airport operations in Germany and other European Countries.
- The long time proven MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
- They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 26 000 propeller systems with more than 87 000 blades are in service.
180 Million fleet hours where already performed on MT-Propellers.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
Piper PA 46-500 equipped with MT’s Quiet Fan Jet 5-blade scimitar composite propeller.
MT-Propeller President Gerd Mühlbauer says that the propeller installation provides
- General performance improvement (10% shorter take-off distance, 4% better climb Performance, 3 kts faster in cruise)
- Approx. 3 lbs less weight than the original metal propeller
- Cooler ITT on ground with condition lever at low and high idle position
- No propeller speed restrictions on ground while operating in low idle, possibility to reduce Ng to 57% for better ground handling
- More ground clearance => less FODs
- All models comply with the strict German noise regulations 2010–„Landeplatz Lärmschutz Verordnung“ for unrestricted airport operations in Germany and other European Countries.
- The long time proven MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
- They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
About MT-Propeller
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 26 000 propeller systems with more than 87 000 blades are in service.
180 Million fleet hours where already performed on MT-Propellers.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
