100,000 MT-Propeller blade manufactured

Awesome success story

MT-Propeller natural composite blades have been a success since they were first built. Because of their natural composite construction, they are much lighter than aluminum propeller systems, have a higher vibration dampening coefficient compared to foam core composite blades. By this they also reduce vibration because the composite material does not support harmonics. No restricted rpm ranges, red bands for those blades on certified installations.



MT-Propeller natural composite blades have been a success since they were first built. Now, the 100,000th prop blade has left the factory in Straubing, Germany.

Those blades have an unlimited blade life, because they can be brought back to the exact factory dimensions during overhaul. Even after a ground strike the blade tips can be rebuilt to the new original dimensions.

The first MT-Propeller blades manufactured in year 1981 are still in service. Their light weight makes it possible to add more blades to a propeller system, which means that 3-blade conversions, for example, can run more quietly than large 2-blade systems, and in addition, smaller propeller arc disks have less drag than larger diameter propeller arc disks. Even 7-bladed propellers for turboprops are now available with lower loads on the engine during operation, compared to classic propeller systems.

This makes MT propellers the first choice for many aircraft owners and aerobatic pilots.

MT propeller blades are also the best choice for wind tunnels, airships and hovercraft.

About MT-Propeller



MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 28 000 propeller systems with more than 100 000 blades are in service.

180 Million fleet hours where already performed on MT-Propellers.

With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
Aircraft Dealer Listings

News

Production ramp-up, new F2 and CT aircraft shipped
September 15th 2023, Eisenach Germany - Flight Design general aviation, the European manufacturer of the F2 and CT series of aircraft reports that the first 2 production F2-LSA models
TMZ mandatory zone in the Netherlands
A TMZ with mandatory listening watch below the Schiphol TMA-1 in the Netherlands is in force since July 13. Many foreign pilots use Dutch airspace, an information pamphlet has been
Successful seventh edition
Bern, 10th September 2023 - This year's Electrifly-In Switzerland, held this weekend at the Swiss Air Force base at Bern Airport, was a success. The event was dedicated to sustainable
Your key to interconnectivity in aviation
This editorial is currently available only in German language.

You may find it here
EASA STC for Piper PA-28R(T)-201T Turbo Arrow III, IV
Atting, August 2023 - MT-Propeller Entwicklung GmbH has received the EASA STC 10082080 for the installation of the 3-blade natural composite propeller MTV-12-D/188-53( ) on the Piper
New STCs for Slingsby Firefly and Airtractor
Atting, January 2023 – German prop manufacturer MT-Propeller Entwicklung GmbH received new authorizations to install their state-of-tge-art propellers to two further aircraft models.
AAS now accredited member of IADA
Atlas Air Service AG is now an accredited member of the International Aircraft Dealers Association (IADA). Members of the IADA are the world's most renowned dealers of business aircraft.
Founded in 1968 - and still going strong in 2023
From humble beginnings, shaped from an idea in the basement of a London pub in 1968, Adams Aviation has reached its milestone 55th birthday. The company has seen plenty of change in
100,000 MT-Propeller blade manufactured
MT-Propeller natural composite blades have been a success since they were first built. Because of their natural composite construction, they are much lighter than aluminum propeller
Piper Meridian converted to a PT6A-135A
Having ideas how to make aircraft quieter and more efficient, MT-Propeller took the Piper M500 Meridian as a new program, replacing the original PT6A-42A engine with a PT6A-135A engine.
more news »
Cover

• incl. 19% VAT and Shipping
• annual subscriptions only (15,- €)